In order to continue delivering high-quality products, Beijer Automotive is always looking for ways to innovate and further develop their products. One of their…
The ANWB Wegenwacht, the Dutch road assistance, is expanding its fleet with a new vehicle, the iconic fully electric Volkswagen ID. Buzz. The BCI…
The Netherlands Measurement Institute (NMi) – an independent specialist in testing, inspection, certification and training in metrology – uses BCI equipment for combination tests…
In recent years Sioux has offered various Logena products to several customers. It is Sioux’s strategy to continue and enhance this delivery into the…
On Friday 27 and Saturday 28 August 2021, Van Den Borne Potatoes, Practice Center for Precision Agriculture and partners will organize the Precision Agriculture…
Commissioned by ANWB, the Royal Dutch Touring Club, Beijer Automotive helped with this special version of their roadside assistance vehicle. Our CAN interface, just…
Beijer and Ctrack have committed to a unique partnership. From now on, Ctrack customers can directly read vehicle sensor information as well, thanks to…
You have already read about our contribution to ‘Smart Asset Management’. A project that is about reading data from vehicles. Until now, the focus…
The Intertraffic 2018 in Amsterdam was dominated by two special moments for Beijer. Firstly, Beijer and ICSB Marketing en Strategie signed a letter of…
Ixor (BE), V-tron (NL) and Beijer Automotive (NL) started the ISA project in practice on 1 January of the new year. ISA stands for…
Prajwal Ramakrishna, student in his final year Master of Automotive Systems at HAN University of Applied Sciences will do his HBO master at Beijer…
Last month the first lot of prototypes of our CAN-to-Bluetooth interface arrived. It is always a special moment when you are the first one…
Imagine every car becoming a measuring instrument on wheels, offering almost all sensor data from every car. Meet Vetuda! Vetuda is the world’s first…
On 31 January the kick-off of the innovation project Car-sensor Enhanced Mobility and Safety System (CEMSS) took place, a cooperation between the Belgian Be-Mobile…
During the mid-term SENTRAC demo last week, signals as fuel consumption and vehicle speed were automatically measured from sensors of a tractor and made…
The so-called CHARM-project, initiated by the English and Dutch road authorities Highways England and Rijkswaterstaat, has entered its third phase. Where phase two focused…
On May 24th 2016, Microsoft visited Amsterdam with its developer event Build. One of the 9 locations worldwide of the Microsoft Build Tour 2016….
The first measurements of the ‘Precision Farming’ project, known as the SENTRAC project in collaboration with Van den Borne Aardappelen and Fleuren Boomkwekerij, were…
The Intertraffic 2016, the world’s leading traffic industry event, will be held in Amsterdam, coming 5-8 April. On April 7th, Marion Braams – CHARM…
The Beijer CAN Controller (BCC), the chip in our Beijer CAN interfaces (BCI) carries our company name from now on. The BCC, which has…
Euphoria Software BV in Tilburg, a leading supplier for the taxi industry, has recently released new enhancements for the Cabman-BCT. It concerns an extended…
Precision agriculture aims to reach a maximum, homogeneous quality and yield with minimal fertilizer and pesticides. Because of less diesel and N-fertilizer use and…
On Wednesday night 11 November 2015 Rijkswaterstaat, the Dutch road authority, undertook with Beijer Automotive among others a unique test with intelligent transport systems…
On September 23, engineers from the Dutch road authorities (Rijkswaterstaat) and its British equivalent Highways England visited Beijer Automotive in Schijndel – the Netherlands…
The RDW, the Dutch type-approval authority, has started a joined exploration process with Beijer Automotive, the vehicle sensor data provider from Schijndel, the Netherlands….
It’s only recently that students from Eindhoven University of Technology (TU/e) presented the world’s first modular car named ‘Nova’. According to the students’ calculations,…
Beijer engineers have begun to dig into the present parameters of electric vehicles (EV’s) in order to gather more knowledge about the vehicle data…
The so-called CHARM-project, initiated by the English and Dutch road authorities Highways England and Rijkswaterstaat, has entered its second phase. A phase in which…
Electric driving in the Netherlands is currently (still) limited to a several thousands of cars. And although many motorists are somewhat hesitant about the…
On Wednesday, November 19th 2014, Minister Schultz van Haegen, the Dutch Minister of Infrastructure and the Environment paid a visit to the Automotive Campus…
SmartCAR Sioux is one of the three service providers (subcontractor Beijer Automotive) participating in the phantom traffic jams project on highway A58 in the…
Is the switched power supply, which we have used for decades, still present in modern cars and suitable for after-market systems? Or do we…
The shockwave traffic jam project (Spookfiles A58) is entering the next phase. Recently seven consortia of market companies started with the development phase of…
The so-called CHARM-project (Common Highways Agency Rijkswaterstaat Model) aims to create a flexible, open, modular high level ICT architecture for traffic management centres (TMC’s)….
Europe’s largest CAN-Datacenter supports the J1939 CAN-bus protocol and the equivalent FMS-standard that is used by European Truck manufacturers. Check out here the BCI-2FMS…
Beijer CAN specialists extracted the data of BMW’s first fully-electric production car, the i3. From the version with range extender they were able to…
Sensovo – feasibility study about the use of vehicles for monitoring road surface quality – uses Beijer technology and vehicle sensor data. Can car…
